• Heavy Duty Frame Kit  (customize your options)

CH-02 - Heavy Duty Frame Kit (customize your options)

This is a 12” deep frame rail for heavy duty applications like dump trucks, concrete mixers, and heavy haul truck tractors. This frame is 4.130” long (359.3" in 1:1 scale). Use this frame kit to create the chassis combination that you need for your specific project. There are an infinite variety of frame combinations for trucks, so to make it simple for you to get the frame setup that you need for your project, choose the parts that you need from the “Available Options” to the right of this page to order exactly what you need for your custom project. Each of the available options may be viewed in detail with a close-up photo by clicking on the “Available Options” thumbnail photo.

Available options include various wheel/tire combinations,  fuel tank options, drive axles, various front bumper styles, engine bottoms, battery boxes and exhaust stacks.. You don’t have to select all or even any of these options but they’re available for you to personalize the chassis for your truck model. We recommend selecting one item from each of the available options categories to build a robust and detailed truck chassis!

You will need to cut the frame to the length that you need, position the axles where you need them, mount the fuel tanks and battery boxes, the bumper, the engine bottom, and add an exhaust stack if needed. This will require some advanced modeling ability, but is not too difficult to acheive with a little time and patience.

If you are unsure about any of the parts that you might need for your particular project,  just send me a message and I’ll be glad to help you order the exact combination that will work for your project.

 

All of the products offered in my catalog are mastered, molded, and cast exclusively by me, so you can be certain that my products are of the highest possible quality. I take great pride in my work, and always ensure that my customers are pleased with their purchases. William Ratcliffe

PLEASE NOTE: All items sold by Ralph Ratcliffe Models are intended for use by adult modelers. Use by children under the age of 14 without adult supervision should not be allowed

Heavy Duty Frame Kit (customize your options)

  • Product Code: CH-02
  • Availability: In Stock
  • $6.00


Available Options


Related Products

10.00 x 20" 5 Spoke Wheel Set

10.00 x 20" 5 Spoke Wheel Set

WH-01 - 10.00 x 20” 5 Spoke Wheel Set   All of the products offered in my catalog are mastered..

$6.00

10.00 x 20" 6 Spoke Wheel Set

10.00 x 20" 6 Spoke Wheel Set

WH-03 - 10.00 x 20” 6 Spoke Wheel Set This is a very common wheel set, used for medium duty appli..

$6.00

10.00 x 20" Budd Disc Wheel Set

10.00 x 20" Budd Disc Wheel Set

WH-02 - 10.00 x 20” Budd Disc Wheel Set   All of the products offered in my catalog are master..

$6.00

11.00 x 22" Stamped Steel Wheel Set

11.00 x 22" Stamped Steel Wheel Set

WH-04 - 11.00 x 22” Stamped Steel Wheel Set   All of the products offered in my catalog are ma..

$14.00

11.00 x 22" West Coast Wheel Set

11.00 x 22" West Coast Wheel Set

WH-05 - 11.00 x 22” West Coast Wheel Set   All of the products offered in my catalog are maste..

$14.00

6 Spoke Cast Mack Wheel Set

6 Spoke Cast Mack Wheel Set

WH-06 - 6 Spoke Cast Mack Wheel Set This wheel set is perfect to use with most of my Mack and Bro..

$8.00

Super Single Wheel Set

Super Single Wheel Set

WH-11 - Super Single Wheel Set   All of the products offered in my catalog are mastered, molde..

$12.00

10 Hole Alcoa Aluminum Wheel Set

10 Hole Alcoa Aluminum Wheel Set

WH-12 - 10 Hole Alcoa Aluminum Wheel Set   All of the products offered in my catalog are maste..

$14.00

Round Custom Fuel Tanks

Round Custom Fuel Tanks

CH-19 - Round Custom Fuel Tanks These tanks have no side steps and are typically used on cabover ..

$4.00

Square Fuel Tanks

Square Fuel Tanks

CH-18-Square Fuel Tanks These tanks are most often used on mack offset cab models but can also be..

$4.00

Mack Round Step Fuel Tanks

Mack Round Step Fuel Tanks

CH-17-Mack Round Step Fuel Tanks These tanks have a recessed step and are used on a wide variety ..

$4.00

Round Fuel Tanks with Steps

Round Fuel Tanks with Steps

CH-20 - Round Fuel Tanks With Steps These tanks are typically used on trucks where the tanks are ..

$4.00

SS44 Mack Tandem Axle Set

SS44 Mack Tandem Axle Set

CH-08 SS44 Tandem Axle Set This is a 44,00 pound capacity rear tandem axle (bogie) for medium dut..

$10.00

SS50 Mack Tandem Axle Set

SS50 Mack Tandem Axle Set

CH-09 SS50 Tandem Axle Set This is a 50,00 pound capacity rear tandem axle (bogie) for medium to ..

$10.00

Single Rear Axle

Single Rear Axle

CH-12 Single Rear Axle Use this single rear axle for single axle tractor applications.   Al..

$6.00

Front Drive Axle

Front Drive Axle

CH-13 - Front Drive Axle This front drive axle will make your frame sit a bit higher than usual, ..

$6.00

Driveshaft

Driveshaft

CH-14 - Driveshaft   All of the products offered in my catalog are mastered, molded, and cast ..

$2.00

Single Exaust Stack

Single Exaust Stack

CH-27 - Single Exaust Stack   All of the products offered in my catalog are mastered, molded, ..

$3.00

Single Exhaust Stack with Heat Shield

Single Exhaust Stack with Heat Shield

CH-28 - Single Exhaust Stack With Heat Shield   All of the products offered in my catalog are ..

$6.00

5th Wheel & Plate

5th Wheel & Plate

TE-10 - 5th Wheel & Plate   All of the products offered in my catalog are mastered, molded, an..

$3.00

Battery Boxes

Battery Boxes

CH-16-Battery Boxes   All of the products offered in my catalog are mastered, molded, and cast..

$4.00

Bumper Style 1

Bumper Style 1

CH-22 Bumper Style 1 This bumper is commonly used on the Mack Granite cab but can also be used on..

$2.00

Bumper style 2

Bumper style 2

CH-23 Bumper Style 2 This bumper is typically used on over the road Macks and is usually chrome p..

$2.00

Bumper Style 3

Bumper Style 3

CH-24 Bumper Style 3 This bumper is typically used on vocational Mack trucks like the DM and RD s..

$2.00

Bumper style 4

Bumper style 4

CH-25 Bumper Style 4 This bumper is typically used on the Mack DM type cabs and has a sign board ..

$2.00

Bumper style 5

Bumper style 5

CH-26 Bumper Style 5 This bumper is typically used on Mack Granite set back axle cabs  but can be..

$2.00

Detroit 8V71 Engine Bottom

Detroit 8V71 Engine Bottom

ET-11 Detroit 8V71 Engine Bottom The classic Detroit “318” which was the horsepower rating of thi..

$2.00

Detroit 12V71 Engine Bottom

Detroit 12V71 Engine Bottom

ET-12 Detroit 12V71 Engine Bottom This is the engine bottom detail of a Detroit Diesel 12V71 Engi..

$2.00

Cat C12 Engine Bottom

Cat C12 Engine Bottom

ET-13 Cat C12 Engine Bottom This is the engine bottom detail of a Caterpillar C12 six cylinder en..

$2.00

Mack E6 Engine Bottom

Mack E6 Engine Bottom

ET-14 Mack E6 Engine Bottom This is the engine bottom detail of a Mack E6, six cylinder engine wi..

$2.00

Mack ENDT865 Engine Bottom

Mack ENDT865 Engine Bottom

ET-15 Mack ENDT 865 Maxidyne Engine Bottom This is the engine bottom detail of a Mack ENDT 865 Ma..

$2.00